WHITE BROWN DA 918 Uživatelský manuál Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 127
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
1-12 | ni.com
Chapter 1 Getting Started with the cDAQ Chassis
Note If you connected the cDAQ chassis directly to your computer, the setup time
may be longer. Wait 30-60 seconds after the STATUS LED turns off, then click
Refresh List.
Contact your system administrator to confirm that the network is working and that a
firewall is not interfering with discovery. For additional troubleshooting resources for
the cDAQ chassis, refer to the Troubleshooting Chassis Connectivity section of this
manual and the Finding a Network DAQ Device in MAX topic in the Measurement &
Automation Explorer Help for NI-DAQmx.
15.
(NI cDAQ-9191) Disconnect the Ethernet cable from NI cDAQ-9191 chassis if you
connected the chassis to a wireless network in step 13.
Note Your computer must be connected to a network that can access the chassis at
its wireless IP.
16.
(NI cDAQ-9191) Verify that the NI cDAQ-9191 chassis is connected to the wireless
network by clicking the Refresh button in MAX and verifying that the Ethernet IP address
is
0.0.0.0 and the wireless IP address remains the same as in step 13.
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 126 127

Komentáře k této Příručce

Žádné komentáře